Each set is dynamically flow‑matched to ensure precise cylinder‑to‑cylinder fueling, which is critical for high‑output 2JZ engines running elevated boost or large turbo systems. Installation is simple thanks to the plug‑and‑play wire adapter harness, ensuring full compatibility with Toyota 2JZ, 2JZGE, and 2JZGTE platforms.

Performance Features:

• True 2200cc/min flow rate

• Genuine Bosch EV14 technology

• Brand‑new, not remanufactured

• High‑impedance design for broad ECU compatibility

• Stainless‑steel internals for maximum durability

• Compatible with pump gas, E85, and race fuels

• Flow‑matched set for balanced AFR and smooth idle

• Includes plug‑and‑play adapter harness

• New O‑rings and seals included

Perfect for drag racing, high‑boost turbo builds, dyno competition setups, and four‑digit horsepower 2JZ projects.

Toyota — 2JZ Engine Family

• 2JZ

• 2JZGE

• 2JZGTE

• Supra MK3 / MK4 (2JZ‑equipped)

• Lexus models using 2JZ variants

• Suitable for NA‑T, turbo, single‑turbo, twin‑turbo, and E85 builds

⚠️ IMPORTANT NOTICE ABOUT E85 / ETHANOL USE These injectors are fully compatible with E85 and ethanol‑based fuels, but proper tuning is mandatory. Running E85 without the correct calibration can cause lean conditions, misfires, cold‑start issues, injector damage, or engine failure.

⚠️Customers must ensure the following before using E85:

• ECU must be tuned specifically for E85

• Fuel pump and fuel lines must be ethanol‑rated

• Fuel filter must be upgraded to an E85‑safe element

• Regular maintenance is required due to ethanol’s corrosive and moisture‑absorbing properties

• Injector duty cycle must be monitored to avoid over‑run at high boost

SouthBay is not responsible for engine damage caused by improper tuning, inadequate fuel system support, or incorrect installation.