usafree

SouthBay Fuel Injectors

SouthBay Fuel Injectors specializes in professionally serviced, flow-tested and performance fuel injectors for automotive, marine and high-performance applications. With over 20 years of fuel-injection experience, we provide new and remanufactured fuel injectors, performance injector sets, and professional fuel injector cleaning and flow-testing services. Our injectors are carefully tested and matched for consistent performance, with applications available for domestic, import, marine and performance vehicles.

2200cc Bosch EV14 Fuel Injectors for BMW E36 M3 – High‑Performance Set of 6 | SouthBay Fuel Injectors

$1,170.00
In stock
SKU
3520

The ultimate fueling capacity for the S5X platform. Our 2200cc SouthBay fuel injectors are the highest-flowing injectors available for the 1995-1999 BMW E36 M3. Engineered for elite-level builds, these injectors provide the massive volume required for high-boost turbo engines running on E85, E100, or Methanol. When horsepower goals enter the four-digit range, these are the only injectors for the job.

Unrivaled Volume for Elite S50/S52 Builds

The 2200cc SouthBay Fuel Injectors (approximately 210lb/hr) are designed for professional racing applications where fuel demand is astronomical. Utilizing high-impedance internal architecture, these injectors offer incredible flow rates while maintaining the response times necessary for precise tuning on modern standalone engine management systems.

Key Features:

  • Maximum Flow Rate: 2200cc/min—engineered to support 1000+ WHP with significant safety margins.

  • Precision Matching: Sold as a set of 6, each injector is flow-matched within 1% to ensure perfect cylinder distribution, which is critical for engine survival at high boost levels.
  • Direct Drop-In Fitment: Designed to fit the standard E36 M3 fuel rail and S50/S52 intake manifolds.

  • Advanced Low-Pulse Control: Despite their size, these injectors offer linear performance at low pulse widths, allowing for manageable idle quality when properly tuned.

Technical Specifications:

  • Engine: BMW S50 / S52 / M50 / M52

  • Chassis: E36 M3, 325i, 328i

  • Configuration: Set of 6 Injectors

  • Impedance: High Impedance

  • Connector Type: Denso

  •  


  •  

Tech Tip: At 2200cc, your fuel system must be a full-race setup. We recommend a minimum of dual 450LPH pumps (or a large external pump), -8AN feed lines, and an aftermarket fuel rail to ensure constant pressure. These injectors are primarily intended for use with standalone ECUs (Haltech, Link, AEM).

⚠️ Important: E85 Usage & Maintenance Warning The internal components of the 2200cc Bosch core are highly sensitive to the "gumming" or sticking effect that can occur with ethanol-based fuels.

  • Storage Recommendation: If the vehicle will be stored for more than 2 weeks, we strictly recommend flushing the fuel system with standard 91/93 octane gasoline.

Proudly Accepting

major-credit-card-logos-png-5_1
Copyright © 2026 SouthBay Fuel Injectors, Inc. All rights reserved.