2200cc BMW E36 M3 SouthBay Fuel Injectors - Set of 6
Proudly Accepting
The ultimate fueling capacity for the S5X platform. Our 2200cc SouthBay fuel injectors are the highest-flowing injectors available for the 1995-1999 BMW E36 M3. Engineered for elite-level builds, these injectors provide the massive volume required for high-boost turbo engines running on E85, E100, or Methanol. When horsepower goals enter the four-digit range, these are the only injectors for the job.
Unrivaled Volume for Elite S50/S52 Builds
The 2200cc SouthBay Fuel Injectors (approximately 210lb/hr) are designed for professional racing applications where fuel demand is astronomical. Utilizing high-impedance internal architecture, these injectors offer incredible flow rates while maintaining the response times necessary for precise tuning on modern standalone engine management systems.
Key Features:
-
Maximum Flow Rate: 2200cc/min—engineered to support 1000+ WHP with significant safety margins.
- Precision Matching: Sold as a set of 6, each injector is flow-matched within 1% to ensure perfect cylinder distribution, which is critical for engine survival at high boost levels.
-
Direct Drop-In Fitment: Designed to fit the standard E36 M3 fuel rail and S50/S52 intake manifolds.
-
Advanced Low-Pulse Control: Despite their size, these injectors offer linear performance at low pulse widths, allowing for manageable idle quality when properly tuned.
Technical Specifications:
-
Engine: BMW S50 / S52 / M50 / M52
-
Chassis: E36 M3, 325i, 328i
-
Configuration: Set of 6 Injectors
-
Impedance: High Impedance
-
Connector Type: Denso
-
Tech Tip: At 2200cc, your fuel system must be a full-race setup. We recommend a minimum of dual 450LPH pumps (or a large external pump), -8AN feed lines, and an aftermarket fuel rail to ensure constant pressure. These injectors are primarily intended for use with standalone ECUs (Haltech, Link, AEM).
