T 516.442.4707 877.772.2965 Become a Dealer

$0.00
You have no items in your shopping cart.

0

More Views

E Tec UltraSonic Fuel Injector Cleaning Service
SKU: 3500

$45.00
OR

Details

E-Tec Fuel Injector UltraSonic Cleaning Service 

Each set of Evinrude/Johnson E-Tec fuel injectors sent to our shop for cleaning service goes  through a careful and exact in house service utilizing top industry ASNU fuel injector test benches and Driver box that permit us to visually check injectors for any discrepancies. For example, poor spray pattern and flow defective nozzels, grimy, clogged and leaking nozzles. 

We use a three stage ultrasonic cleaning and back flush to remove all dirt partials inside the fuel injector. A leakdown test at 80psi, double the typical working pressure. All-new top-quality parts such as Filter, O-rings, Crush rings to guarantee your fuel injector is prepared to be installed, 

We Ohm the Injectors to start. If the Injector Ohms below 2 Ohms, we will not work on it or charge you. If the Injector Ohms above 2, we will work on the injector and charge you for the service.  All Injectors we work on (dead or alive) are $45.00 each. We make every effort to save Injectors.  If we can't bring it back to spec, nobody can. We work hard to turn all injectors around as fast as possible. E-Tec injectors can take longer then mpi injectors. 

Print and fill out the Service Order Form and send in with injectors. Please include your name, phone number and email address for return tracking. No need to send payment in advance. We'll call you after the job is completed for payment and shipping instructions.

Additional Information

Brand Not defined